Flash Drying Technology
Tidecom Group adheres to the business philosophy of "creating value for customers and innovating life with technology", integrates global industry resources, continues technological research and development innovation, and is guided by market customer needs, providing customers with more cost-effective products and services.
The Flash Drying Technology is suitable for the drying process of various types of starch, and can also be used for drying other heat sensitive powder or sheet materials that require rapid drying. This Flash Drying Technology is based on scientific theory, strictly controlling the process configuration and technical parameters of each link to ensure the quality of the dried materials.
Category:
Keyword:
Special equipment | General purpose
Product Description
Application
The Flash Drying Technology is suitable for the drying process of various types of starch, and can also be used for drying other heat sensitive powder or sheet materials that require rapid drying. This Flash Drying Technology is based on scientific theory, strictly controlling the process configuration and technical parameters of each link to ensure the quality of the dried materials.
Features
(1) We can provide high-pressure or low-pressure drying systems according to customer needs, with specially designed drying tubes that minimize equipment height while achieving drying efficiency, making installation and maintenance easier;
(2) Equipped with a thermal energy recovery and utilization device to improve thermal efficiency;
(3) Equipped with an automatic water content adjustment device for finished products, ensuring the certainty and accuracy of the moisture content of the dried materials;
(4) Equipped with a material cooling system to ensure product quality; Can reduce energy consumption by 50%.
Working principle
During the drying process, fresh and clean air is heated through a heat exchanger and mixed with the material particles transported from the lifting machine (or a specially designed sealed screw conveyor can be used to transport the particle materials), and hot air is used as the medium to transfer heat energy to the material particles. Make the moisture attached to the surface of material particles and some of the internal material particles turn into steam and mix into the airflow in the drying tube. Finally, a cyclone separator (sand dragon) and a shut-off device are used to separate the material from air and water vapor, thereby reducing the moisture content in the material. The dried material enters the next process through the discharge port; The exhaust gas is discharged through the exhaust pipe through the main pipe of the induced draft fan.
Technical parameters
|
Model |
Capacity(t/h) |
Power (kw) |
Moisture content (Incoming material) % |
Moisture content (finished) % |
|
SFD0.67A(B) |
2 |
15+75 |
《 40 |
12-18 |
|
SFD0.33A(B) |
4 |
18.5+90 |
《 40 |
12-18 |
|
SFD2A(B) |
6 |
18.5+132 |
《 40 |
12-18 |
|
SFD2.67A(B) |
8 |
18.5+160 |
《 40 |
12-18 |
|
SFD3.33A(B) |
10 |
18.5+220 |
《 40 |
12-18 |
Related Products
Online Message
Message Feedback
Contact TTC Group
Tel：+86-551-62526166
Email：info@tidecomgroup.com
Address: F32, Tower C, Linbinyuan, Binhu CBD, Hefei, Anhui, P.R. of China
© TIDECOM TECHNOLOGY CO., LTD. All Rights Reserved