sao tome and principe Centrifugal Peeler
Product Description
The High‑speed centrifugal dryer is a vital industrial drying solution that uses rapid spinning to remove moisture quickly and efficiently from materials, reducing drying time and energy use while improving product quality and production output.
The Centrifugal Peeler is a filter centrifuge that operates continuously and unloads intermittently, and divided into common centrifugal peeler, siphon centrifugal peeler and through-the-wall centrifugal peeler. The machine can perform periodic cycle operation automatically or manually. The operation time at each stage of filter process can be adjusted optionally to obtain the filter cake with low moisture content, and realize the good washing and efficient handling. It mainly applies to separation of suspension containing medium-grain particles, such as the dewatering separation of calcium hypochlorite, polyvinyl chloride, trichloroisocy anuric acid, polyacrylonitrile, calcium bicarbonate, graphite, cephalosporin, ammonium sulfate, ammonium bicarbonate, starch, potassium chloride, sodium bicarbonate and other materials, and serves in food industry, petrochemical engineering, salinization, pharmacy and other industries.
Product Principle
Open the feeding valve in working and materials are evenly distributed onto filter medium on inner wall of basket by distributor. Liquid phase passes through filter medium and small holes on basket and is discharged out of basket under the action of centrifugal force while solid phase is retained onto filter medium and forms annular filter cake. Stop feeding when filter cake layer reaches the set thickness, wash the filter cake and close washing valve after washing is done. Continue dewatering materials and fully dry them, start peeler for unloading and filter cake is scraped by peeler and discharged out of machine through discharge pipe, and peeler retracts after unloading is done and enters the next cycle.
Features
Variable-frequency speed governing and PLC program control is adopted and electric system, hydraulic system and pneumatic system are configured to realize the whole-process automatic control, covering feeding, separation, washing, dewatering and unloading. Convenient to use and easy to operate, it can complete feeding, separation, washing, dewatering, unloading and other operations under full speed, and meet the requirements of heavy-load production. The fully-closed structural design is adopted and automatic nitrogen refilling system and oxide concentration test system are optional to meet the requirements of separating toxic, hazardous, easily oxidized and inflammable, explosive materials. It is designed with complete test and protection, including door cover locking, host vibration, main bearing temperature, insufficient oil for main bearing lubrication, material level test, peeler position test, motor over-load protection and others. Tubular discharge and screw discharge can be selected according to different materials to adapt to wider material range.
Message Feedback
Contact TTC Group
Tel：+86-551-62526166
Email：info@tidecomgroup.com
Address: F32, Tower C, Linbinyuan, Binhu CBD, Hefei, Anhui, P.R. of China
© TIDECOM TECHNOLOGY CO., LTD. All Rights Reserved