MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System
MVR Evaporation System

Papua New Guinea MVR Evaporation System

MVR (Mechanical Vapor Recompression) refers to the process of compressing the secondary steam from evaporation, distillation, and other processes again with a compressor, increasing the enthalpy of the compressed secondary steam, and reheating the materials that need to be evaporated as a heat source, thereby achieving the goal of recycling steam and eliminating the need for additional steam supplementation during the evaporation process; A high-efficiency energy recycling and energy-saving evaporation technology that uses a small amount of electrical energy to obtain more thermal energy, thereby reducing the system's demand for external energy.

Category:

Papua New GuineaEvaporation Engineering

Phone:400-888-8888

Inquire

Product Description

MVR system composition: preheater, evaporator body, separator, compressor, pump, valve instrument, automatic control system, steel platform, etc.

1

Advantages of MVR evaporator:
1. The evaporation temperature is low and can be controlled at a minimum of 45-55 ° C, with no foaming, no material leakage, and high evaporation efficiency.
2. The heat exchange temperature difference is small, which can achieve mild evaporation and is not prone to coking, making it very suitable for heat sensitive materials.
3. It can be used to evaporate materials with high concentration and high viscosity (0.05-0.45Pa * s), with membrane flow and small temperature difference loss.
4. The structural process is simple, can run continuously, and is safe and reliable.
5. The equipment is equipped with CIP fully automatic cleaning pipelines, and the workmanship is precise, completely achieving no residue or dead corners.
6. It does not require a steam condenser, has a simple structure, is easy to maintain, and can be operated under reduced pressure, normal pressure, and pressurized conditions.

Performance Comparison:

Item/Type Reaction kettle Single effect evaporator Multiple effect evaporator MVR evaporator
Energy consumption Evaporating one ton of water requires about 1.5-2 tons of fresh steam Evaporating one ton of water requires about one ton of fresh steam The five effect evaporator requires about 0.3 tons of fresh steam to evaporate one ton of water Evaporating one ton of water requires about 35-70kw/h of electricity consumption
Energy source Fresh steam Fresh steam Fresh steam Industrial electricity
Operating cost Extremely high Higher High Low
Product quality The product has a long residence time and unstable quality, which has a significant impact on the product quality. Short product dwell time, large temperature difference, and minimal impact on product quality. The product has a long residence time and a large temperature difference, which has a small impact on product quality. Short product retention time, low-temperature evaporation, and minimal impact on product quality.
Control mode Manual Semi-automatic Semi-automatic Fully automatic
Cover an area Small Small Large Small

 

previous page:

Papua New Guineanone

Papua New GuineaTVR Evaporation System

: next page

Message Feedback

Submit